Vertical lifeline system

SAFLY V/C series

The SAFLY V/C series vertical lifeline system is a type of cable system that provides continuous protection in the vertical direction, 

conforms to the EN353-1.

The SAFLY V/C series vertical fall lifeline is designed for climing the wind turbine towers, transmission towers, pressure vessels, piers,

 masts, antenna poles, and buildings. The vertical fall protection system is connected to the users with the fall arrester. Users move up

 and down easily and smoothly along the system . Once a fall occurs, the fall arrester will be rapidly locked onto the lifeline, the shock 

absorber of fall arrester will be opened, to minimise the impact force acted on the user. The system is designed for protecting the safety 

of persons working at heights and performing downhole operation.

The fall lifeline is provided with shock absorbing.
The installation is timesaving and convenient.
All the fittings are made of galvanized steel and stainless steel, ensure the system is difficult to corrode, durable andconvenient to use.
The galvanized steel or stainless steel wire rope enables that no connection points exist in the overall structure, to assure integral high safety.
STG-1 guided type fall arrester is equipped with the shock absorber pack, which minimise the impact force and avoid the persons from being hurt.
In cooperation with dedicated safety harnesses that conform to EN358, EN361 and EN813, the impact force acting on the user does not exceed 6 kN,

to ensure the safety of the falling person. 

Equipped with the automatic tensioning device, SAFLY system will not be affected by the temperature. The cable is always in the state of tension.
The guide plate allows the cable to be always located in the certain position of ladder, and no deviate, to facilitate the users moving up and down.